Shop Novellus
Custom & Build-to-Order Products
Showing all 8 results
CANALOG
Price:
$4,500.00 Excludes tax and shipping Read moreCANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals.
CANary FD BoB
Price:
$1,070.00 Excludes tax and shipping Read moreThe CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks
CAN Signal Modifier
Price:
$3,350.00 Excludes tax and shipping Order HereCAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.
Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.
Ethanol Analyzer
Price:
$3,343.75 Excludes tax and shipping Order HereThe Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.
TCAN
Price:
$3,612.00 Excludes tax and shipping Order HereThe TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.
This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.
TriCAN v1
Price:
$2,408.00 Excludes tax and shipping Read moreThe TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.
For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.
TriCAN v2
Price:
$3,010.00 Excludes tax and shipping Read moreThe TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.
The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.
Showing all 8 results
CANALOG
Price:
$4,500.00 Excludes tax and shipping Read moreCANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals.
CANary FD BoB
Price:
$1,070.00 Excludes tax and shipping Read moreThe CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks
CAN Signal Modifier
Price:
$3,350.00 Excludes tax and shipping Order HereCAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.
Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.
Ethanol Analyzer
Price:
$3,343.75 Excludes tax and shipping Order HereThe Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.
TCAN
Price:
$3,612.00 Excludes tax and shipping Order HereThe TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.
This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.
TriCAN v1
Price:
$2,408.00 Excludes tax and shipping Read moreThe TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.
For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.
TriCAN v2
Price:
$3,010.00 Excludes tax and shipping Read moreThe TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.
The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.
Analog to PWM Controller
Price:
$1,043.25 Excludes tax and shipping Read moreAnalog to PWM Controller is designed to convert a 0 to 5Vdc analog input voltage to a PWM output proportional to the input voltage.
Dual Track PWM TRS Simulator
Price:
$1,472.00 Excludes tax and shipping Read moreThe Dual Track PWM TRS (Transmission Range Selector) Simulator is designed to validate the commanded outputs from the actuation of a transmission shift solenoid based on 2 PWM signals. This debugger reads and displays the PWM output of the two tracks from the TRS which is used to select a specific gear within the transmission.








