Shop Novellus

white line
Custom & Build-to-Order Products

Showing all 8 results

Canalog

CANALOG

SKU:Part# N20-004 Built to Order
Price:
$4,500.00 Excludes tax and shipping
Read more

CANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals. 

CANary BoB

SKU:Part# N20-001 Built to Order
Price:
$803.00 Excludes tax and shipping
Read more
CANary FD BoB

CANary FD BoB

SKU:Part# N20-006 Built to Order
Price:
$1,070.00 Excludes tax and shipping
Read more

The CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks

CAN SINGLE MODIFIER

CAN Signal Modifier

SKU:Part# N20-008 Built to Order
Price:
$3,350.00 Excludes tax and shipping
Order Here

CAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.

Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.

Ethanol Analyzer

SKU:Part# N20-002 Built to Order
Price:
$3,343.75 Excludes tax and shipping
Order Here

The Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.

TCAN

SKU:Part# N20-005 Built to Order
Price:
$3,612.00 Excludes tax and shipping
Order Here

The TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.

This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.

Tri-CAN v1

TriCAN v1

SKU:Part# N20-003 Built to Order
Price:
$2,408.00 Excludes tax and shipping
Read more

The TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.

For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.

TriCAN v2

SKU:Part# N20-007 Built to Order
Price:
$3,010.00 Excludes tax and shipping
Read more

The TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.

The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.

Showing all 8 results

IPM Tester V2

IPM Tester v2

SKU:Part# N50-010 Built to Order
Price:
$2,235.00 Excludes tax and shipping
Read more

The IPM (Internal Parking Mechanism) Tester v2 is designed to actuate the transmission rotary solenoid, allowing the transmission to be placed into various operating modes for testing, validation, and development purposes.

The unit includes a power cable for connection to a standard AC wall outlet and a 2-meter signal cable for interfacing with the test system.

Note: Customers are responsible for supplying the required bulkhead connectors for their cable assemblies. Unless otherwise specified, all customer-side cable terminations are provided unterminated.

Dyno Clutch Controller

Dyno Clutch Controller

SKU:Part# N50-011 Built to Order
Price:
$2,007.00 Excludes tax and shipping
Read more

The Dual Track PWM Transmission Range Selector (TRS) Simulator is designed to validate commanded outputs from transmission shift control systems that utilize dual PWM signals for gear selection. The device monitors, reads, and displays the PWM outputs from both TRS signal tracks, enabling accurate verification of transmission range commands.

By providing real-time visibility into the PWM signals used to select transmission gears, the simulator serves as an effective diagnostic and debugging tool for transmission development, validation, and troubleshooting applications.

PWM to Analog Controller

SKU:Part# N50-013 Built to Order
Price:
$1,044.00 Excludes tax and shipping
Read more

The Analog to PWM Controller is designed to convert a 0 to 5 VDC analog input signal into a proportional PWM (Pulse Width Modulation) output. The output duty cycle is directly scaled to the input voltage, providing accurate and responsive control of PWM-based devices and systems.

This controller offers a simple and reliable solution for interfacing analog control signals with applications that require PWM input.

Frequency Divider

SKU:Part# N10-005 Built to Order
Price:
$1,136.88 Excludes tax and shipping
Read more

The Frequency Divider is a signal-conditioning device that reduces an input frequency by a factor of 2 or 4, enabling high-frequency signals to be measured by data acquisition systems with limited frequency input capabilities. 

By scaling the frequency signal before acquisition, the device allows otherwise unmeasurable data to be recorded reliably. During post-processing, the recorded values can be multiplied by the corresponding division factor to restore the original frequency and accurately represent the source signal. 

This device is ideal for applications requiring the capture and analysis of high-frequency signals that exceed the operational limits of the measurement system. 

Single Track PWM TRS Simulator

SKU:Part# N50-001 Built to Order
Price:
$870.00 Excludes tax and shipping
Read more

Info Coming Soon

Solenoid Controller #1

SKU:Part# N50-004 Built to Order
Price:
$2,040.00 Excludes tax and shipping
Read more

Info Coming Soon

Solenoid Controller #2

SKU:Part# N50-005 Built to Order
Price:
$2,040.00 Excludes tax and shipping
Read more

Info Coming Soon

Solenoid Controller #3

SKU:Part# N50-006 Built to Order
Price:
$2,040.00 Excludes tax and shipping
Read more

Info Coming Soon

Solenoid Controller #4

SKU:Part# N50-007 Built to Order
Price:
$2,040.00 Excludes tax and shipping
Read more

Info Coming Soon

Valve Body #1 (No Temp)

SKU:Part# N50-008 Built to Order
Price:
$1,097.00 Excludes tax and shipping
Read more

Info Coming Soon
NOTE: Customer to supply valve manifold.