Shop Novellus
Custom & Build-to-Order Products
Showing all 8 results
CANALOG
Price:
$4,200.00 Excludes tax and shipping Read moreThis tool connects to any CAN or CAN FD network. The tool will use the input configuration and convert the selected CAN channels into analog or PWM outputs. Both the analog and PWM channels can be scaled using a Y=MX+B slope and offset formula.
CANary FD BoB
Price:
$1,000.00 Excludes tax and shipping Read moreThe CANary FD Breakout Box is an interface to the ATI Canary and bring out the 4 CAN channels and power to the ATI analog hardware through the standard LEMO instrumentation connectors. Access to the 4 CAN channels is available via the 4 DB9s.
CAN Signal Modifier
Price:
$3,125.00 Excludes tax and shipping Order On AmazonThe CAN Signal Modifier intercepts CAN/CAN-FD messages, modifies them by applying an offset and scalar, and sends them to the original receiver. This modifier is configurable through the USB compatible software. Primary uses include calibration development, verification and simulating faults for OBDII monitors within the new EPA regulations.
Ethanol Analyzer
Price:
$3,125.00 Excludes tax and shipping Order On AmazonThe Ethanol Analyzer can be placed inline and will read the percent ethanol and temperature of the fuel. The values will be output over high speed CAN and CAN FD networks.
TCAN
Price:
$3,375.00 Excludes tax and shipping Order On AmazonThis tool converts data from 4 thermocouples (TC) into CAN messages. It is also able to add offsets and scalers to CAN signals from the CAN input to the CAN output.
TriCAN v1
Price:
$2,250.00 Excludes tax and shipping Read moreThis module is a CAN monitoring device. The TriCAN tool is a CAN network device that can operate on CAN 2.0B (medium and high speed CAN networks) as well as CAN FD. It has built-in CAN termination that can be turned on or off as required by the network.
TriCAN v2
Price:
$2,812.50 Excludes tax and shipping Read moreThis handheld device collects and display CAN data from the vehicle’s OBDII port. The resulting data is displayed on TriCAN V2 Display and/or the user’s device via Bluetooth connection. This CAN network tool is compatible with CAN 2.0B (medium & high speed CAN networks) as well as CAN FD. It has built in CAN termination that can be turned on or off as required by the network.
Showing all 8 results
Valve Body #1 (No Temp)
Price:
$1,025.00 Excludes tax and shipping Read moreInfo Coming Soon
NOTE: Customer to supply valve manifold.
Valve Body #2 (w/ Temp)
Price:
$1,125.00 Excludes tax and shipping Read moreInfo Coming Soon
NOTE: Customer to provide valve manifold and temperature gauge.
Injector Conditioner
Price:
$3,681.25 Excludes tax and shipping Read moreThe 8 Channel Injector Conditioner is a fully isolated signal conditioner designed to convert both Port Fuel Injection (PFI) and Gasoline Direct Injection (GDI) injector signals to 0 to 5 volt pulses and provide an analog representation of the signal in real time. The 8 Channel Injector Conditioner also provides an LED output for a simplified indicator of injector activity.
Programmable Twin Turbo Speed Analyzer (PTTSA)
Price:
$2,375.00 Excludes tax and shipping Order On AmazonThe analyzer monitors the speed of two turbo chargers using a screw-in sensor that analyzes the rate of rotation. Buttons on the front of the device allow the user to for configure sensor type, number of fins on the turbo, maximum RPM, and output voltage range. The speed analyzer allows for a wide range of sensors including, but not limited to, Picoturn, Jaquete, and custom. The analyzer has dual channel capability with output options of analog and/or CAN.
Universal Spark Conditioner w/ Multi-Strike Elimination
Price:
$1,500.00 Excludes tax and shipping Read moreThe Universal Spark Conditioner is designed to condition +12V coils primary or low voltage spark signals. This conditioner takes up to all 12 signals and outputs them onto one pulse train. It allows the monitoring/recording of those signals with a variety of data acquisition tools or control systems. Multi-strike elimination output gives the only the first firing of each combustion cycle. Selection of leading or trailing edge is provided through a switch on the side of the module.
Leaf Professional SWC
Price:
$1,153.00 Excludes tax and shipping Read moreKvaser Leaf Professional is a one channel, high performance, USB interface for Single Wire CAN. A versatile and powerful interface that offers easy connection between your PC and CANbus network, it includes Kvaser’s patented MagiSync feature for synchronized time-stamping, Galvanic Isolation for protection against voltage spikes, and Auto Transmit for placing messages on the bus at set intervals.
Leaf Professional LIN
Price:
$612.00 Excludes tax and shipping Read moreThe Kvaser Leaf Professional LIN provides an easy way of connecting a PC with LIN bus devices. Compatible with both LIN 1.3 and 2.x, the Kvaser Leaf Professional LIN incorporates advanced features like error handling, silent mode for analyzing tools, and 100% compatibility with applications written for all Kvaser hardware with Kvaser’s LINlib.
PCIEcanx 4xHS
Price:
$933.00 Excludes tax and shipping Read moreKvaser PCIcanx 4xHS is a four channel, high speed CAN (controller area network) interface that can be used in both regular PCI and PCI-X slots. A galvanically isolated CAN bus driver protects the hardware. The onboard CAN controller is I/O mapped for quick reaction times. The PCIcanx 4xHS is ideal for multichannel data gathering applications, such as in laboratories.
