Shop Novellus

white line
Custom & Build-to-Order Products

Showing all 8 results

Canalog

CANALOG

SKU:Part# N20-004 Built to Order
Price:
$4,500.00 Excludes tax and shipping
Read more

CANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals. 

CANary BoB

SKU:Part# N20-001 Built to Order
Price:
$803.00 Excludes tax and shipping
Read more
CANary FD BoB

CANary FD BoB

SKU:Part# N20-006 Built to Order
Price:
$1,070.00 Excludes tax and shipping
Read more

The CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks

CAN SINGLE MODIFIER

CAN Signal Modifier

SKU:Part# N20-008 Built to Order
Price:
$3,350.00 Excludes tax and shipping
Order Here

CAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.

Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.

Ethanol Analyzer

SKU:Part# N20-002 Built to Order
Price:
$3,343.75 Excludes tax and shipping
Order Here

The Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.

TCAN

SKU:Part# N20-005 Built to Order
Price:
$3,612.00 Excludes tax and shipping
Order Here

The TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.

This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.

Tri-CAN v1

TriCAN v1

SKU:Part# N20-003 Built to Order
Price:
$2,408.00 Excludes tax and shipping
Read more

The TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.

For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.

TriCAN v2

SKU:Part# N20-007 Built to Order
Price:
$3,010.00 Excludes tax and shipping
Read more

The TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.

The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.

Showing all 8 results

Kvaser USBcan Light 2xHS

SKU:73-30130-00714-7
Price:
$660.00 Excludes tax and shipping
Read more

The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high speed CAN busses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other, the Kvaser USBcan Light 2xHS is a fraction larger than the one-channel Leaf Light v2 but features the same sleek, ergonomically designed housing that Kvaser products have become renowned for and comes with galvanic isolation as standard.

Kvaser Leaf Light HS v2 OBDII

SKU:73-30130-00732-1
Price:
$463.00 Excludes tax and shipping
Read more

Kvaser Leaf Light HS v2 OBD-II is an End of Life product. Please contact support for replacement product or more information.

Kvaser Leaf Light HS v2 CB

SKU:73-30130-00733-8
Price:
$463.00 Excludes tax and shipping
Read more

Kvaser Leaf Light HS v2 CB is an End of Life product. Please contact support for replacement product or more information.

Kvaser Mini PCI Express 2xHS

SKU:73-30130-00743-7
Price:
$660.00 Excludes tax and shipping
Read more

Measuring 30 x 51mm, the Kvaser Mini PCI Express 2xHS is a highly integrated CAN (controller area network) add-on board that adds two high speed CAN channels to any standard computer board with mini PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, the small form factor board fits any embedded data acquisition systems, but is particularly suitable for fleet management to monitor key parameters such as fuel economy, engine speed, braking and accelerator pressure, and gearshift patterns.

Kvaser USBcan Pro 2xHS v2

SKU:73-30130-00752-9
Price:
$1,087.00 Excludes tax and shipping
Read more

The USBcan Pro 2xHS v2 is a USB to dual-channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.

Kvaser Memorator Pro 5xHS

SKU:73-30130-00778-9
Price:
$3,280.00 Excludes tax and shipping
Read more

Kvaser Memorator Pro 5xHS is a five channel, high performance, CAN (controller area network) bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB. This device supports CAN FD.

Configurable using Kvaser’s Memorator Config Tool, Memorator Professional 5xHS is also capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied.

Kvaser Air Bridge Light HS

SKU:73-30130-00808-3
Price:
$990.00 Excludes tax and shipping
Read more

Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN.

There are two versions: Kvaser Air Bridge Light HS (00808-3) is approved for the European Union, while Kvaser Air Bridge Light HS (FCC) (01008-6) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences.

Kvaser Memorator Pro 2xHS v2

SKU:73-30130-00819-9
Price:
$1,519.00 Excludes tax and shipping
Read more

Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation.

Connected to a PC with USB2.0, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder.

Configurable using Kvaser’s Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.

Kvaser Memorator 2xHS v2

SKU:73-30130-00821-2
Price:
$1,411.00 Excludes tax and shipping
Buy product

The Kvaser Memorator 2xHS v2 is a compact, dual channel CAN bus interface and standalone datalogger that allows users to monitor and collect data from two high speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC, via USB.

As a data logger, Memorator makes for a perfect flight recorder due to its compact design. Triggers and filters can be set on this device by means of a user-friendly configuration program and stored on the standard SD card (supplied).

Kvaser USBcan Light 4xHS

SKU:73-30130-00831-1
Price:
$791.00 Excludes tax and shipping
Buy product

The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors.