Shop Novellus

white line
Custom & Build-to-Order Products

Showing all 8 results

Canalog

CANALOG

SKU:Part# N20-004 Built to Order
Price:
$4,500.00 Excludes tax and shipping
Read more

CANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals. 

CANary BoB

SKU:Part# N20-001 Built to Order
Price:
$803.00 Excludes tax and shipping
Read more
CANary FD BoB

CANary FD BoB

SKU:Part# N20-006 Built to Order
Price:
$1,070.00 Excludes tax and shipping
Read more

The CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks

CAN SINGLE MODIFIER

CAN Signal Modifier

SKU:Part# N20-008 Built to Order
Price:
$3,350.00 Excludes tax and shipping
Order Here

CAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.

Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.

Ethanol Analyzer

SKU:Part# N20-002 Built to Order
Price:
$3,343.75 Excludes tax and shipping
Order Here

The Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.

TCAN

SKU:Part# N20-005 Built to Order
Price:
$3,612.00 Excludes tax and shipping
Order Here

The TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.

This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.

Tri-CAN v1

TriCAN v1

SKU:Part# N20-003 Built to Order
Price:
$2,408.00 Excludes tax and shipping
Read more

The TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.

For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.

TriCAN v2

SKU:Part# N20-007 Built to Order
Price:
$3,010.00 Excludes tax and shipping
Read more

The TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.

The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.

Showing all 8 results

Kvaser Leaf Light R v2

SKU:73-30130-00921-9
Price:
$451.00 Excludes tax and shipping
Read more

The Kvaser Leaf Light R v2 is the rugged version of Kvaser’s popular Leaf Light v2 interface. This is a single channel CAN bus interface with a lightweight yet highly durable, IP65-rated housing that assures reliable protection against water and dust ingress. Vibration, shock and drop proof, this interface belongs to Kvaser’s Rugged range and operates over a temperature range of -40 to +70°C.

With a standard USB2.0 connection and a high-speed CAN channel in a 9-pin D-SUB CAN connector, the Kvaser Leaf Light R v2 handles transmission and reception of standard and extended CAN messages, with a time stamp precision of 100 microseconds. Features include error frame detection and LED indicators for power and CAN channel status.

Kvaser Hybrid 2xCAN/LIN

SKU:73-30130-00965-3
Price:
$802.00 Excludes tax and shipping
Read more

Kvaser Hybrid 2xCAN/LIN is a flexible, dual channel interface that allows each channel to be assigned independently as CAN or LIN. This makes the Kvaser Hybrid 2xCAN/LIN a must-have ’universal interface’ for every engineer involved in automotive communications!

With a standard USB connector and two CAN/LIN channels in two separate 9-pin D-SUB connectors, this interface can connect a PC to two CAN buses, two LIN buses, or one CAN and one LIN bus.

Kvaser Ethercan HS

SKU:73-30130-00976-9
Price:
$831.00 Excludes tax and shipping
Read more

The Kvaser Ethercan HS is a powerful, real-time Ethernet to CAN interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be remotely accessed from anywhere in the world. Built-in Power over Ethernet (PoE) eliminates the need for a separate power cable when you can’t power the device from the CAN bus.

Kvaser’s Ethercan product range makes it easy to implement the Internet of Things (IoT) concept by enabling data from any CAN product or system to be sent over a corporate network or WAN, using the standard Kvaser CANlib API. Users of the Kvaser Ethercan HS can also choose to connect to the device using the built-in REST API for web-enabled devices, such as smartphones.
As a programmable interface, the Kvaser Ethercan HS is suited to advanced applications, such as ECU reflashing. For example, a t program could be created to process CAN messages locally in the device, removing the latency of WiFi and/or Ethernet.

Kvaser Mini PCI Express 2xHS v2

SKU:73-30130-01029-1
Price:
$683.00 Excludes tax and shipping
Read more

The Kvaser Mini PCI Express 2xHS v2 is a small (30 x 51mm), yet advanced, real time CAN interface that adds two high speed CAN or CAN FD channels to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs.

Kvaser Mini PCI Express HS v2

SKU:73-30130-01038-3
Price:
$467.00 Excludes tax and shipping
Read more

The Kvaser Mini PCI Express HS v2 is a small (30 x 51mm), yet advanced, real time CAN interface that adds one high speed CAN or CAN FD channel to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs.

Kvaser Hybrid Pro 2xCAN/LIN

SKU:73-30130-01042-0
Price:
$1,212.00 Excludes tax and shipping
Read more

Kvaser Hybrid Pro 2xCAN/LIN is a flexible, dual channel interface that allows each channel to be assigned independently as CAN, CAN FD or LIN. This makes the Kvaser Hybrid Pro 2xCAN/LIN a must-have ’universal interface’ for every engineer involved in automotive communications!

The Kvaser Hybrid Pro 2xCAN/LIN offers advanced features such as support for CAN FD, Silent Mode, Single Shot, Error Frame Generation and Kvaser MagiSync automatic clock synchronization. As a Pro-level device, this interface can host user-developed programs, created using resources provided within Kvaser’s free CANlib SDK. These can be designed to accomplish a range of advanced tasks, such as CAN node simulation and CAN flashing, or create a LIN to CAN gateway. Guidance and code examples are provided.

Kvaser Memorator Light HS v2

SKU:73-30130-01058-1
Price:
$649.00 Excludes tax and shipping
Read more

Designed for troubleshooting any CAN-based (controller area network) system, the Kvaser Memorator Light HS v2 is an easy-to-use tool for logging serial data, with no software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.

Kvaser DIN Rail SE400S-X10

SKU:73-30130-01059-8
Price:
$1,819.00 Excludes tax and shipping
Read more

The Kvaser DIN Rail SE400S-X10 is a multichannel, programmable Ethernet to CAN/CAN FD interface for DIN Rail mounting. This device has four CAN/CAN FD channels and supports up to four optional Kvaser DIN Rail SE400S-X10 I/O add-on modules of which there are three different types; analog, digital and relay. Ideal for automotive test cell or end-of-line production test applications, the SE400S-X10 can download and run programs created in the Kvaser t programming language, such as diagnostics routines to test automotive body control modules.

Kvaser DIN Rail S010-X10 Digital add-on

SKU:73-30130-01065-9
Price:
$336.00 Excludes tax and shipping
Read more

Kvaser DIN Rail S010-X10 Digital is an optional add-on module to the Kvaser DIN Rail SE400S-X10 base module* with 16 digital inputs and 16 digital outputs. This IP20-rated module is thermal, reverse-polarity protected and surge power supply protected. A power LED displays the state of the module, whilst there are separate LEDs for each of the inputs and outputs.

*Please note: Add-on modules require a Kvaser DIN Rail SE400S-X10 to be able to work.

Kvaser DIN Rail S020-X10 Analog add-on

SKU:73-30130-01066-6
Price:
$336.00 Excludes tax and shipping
Read more

vaser DIN Rail S020-X10 Analog is an optional add-on module to the Kvaser DIN Rail SE400S-X10 base module. With four analog inputs and four outputs, this IP20-rated module is thermal, reverse-polarity protected and surge power supply protected. The input voltage range is fixed (between 0 and 10V), and resolution is 12 bits. A power LED displays the state of the module.