Shop Novellus
Custom & Build-to-Order Products
Showing all 8 results
CANALOG
Price:
$4,500.00 Excludes tax and shipping Read moreCANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals.
CANary FD BoB
Price:
$1,070.00 Excludes tax and shipping Read moreThe CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks
CAN Signal Modifier
Price:
$3,350.00 Excludes tax and shipping Order HereCAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.
Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.
Ethanol Analyzer
Price:
$3,343.75 Excludes tax and shipping Order HereThe Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.
TCAN
Price:
$3,612.00 Excludes tax and shipping Order HereThe TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.
This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.
TriCAN v1
Price:
$2,408.00 Excludes tax and shipping Read moreThe TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.
For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.
TriCAN v2
Price:
$3,010.00 Excludes tax and shipping Read moreThe TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.
The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.
Showing all 8 results
Kvaser DIN Rail S030-X11 Relay add-on
Price:
$336.00 Excludes tax and shipping Read moreKvaser DIN Rail S030-X11 Relay is an optional add-on module to the Kvaser DIN Rail SE400S-X10 base module with eight N.O. (Normally Open) relays and eight digital inputs that can be used separately. This IP20-rated module is thermal, reverse-polarity protected and surge power supply protected. A power LED displays the state of the module, whilst there are separate LEDs for each of the digital inputs.
RCM Module (RCM) (w/ separate DC Voltage Booster)
Price:
$8,025.00 Excludes tax and shipping Buy productThe Remote Calibration Module (RCM) is a secure remote-access platform designed to provide connectivity to a wide range of calibration and development tools. Engineered for remote testing and calibration activities, the RCM enables high-speed data collection, storage, transfer, and remote access to support both on-site and off-site development programs.
The system supports a variety of connectivity options and can be utilized in numerous applications, including vehicle testing, dynamometer operations, and powertrain development. The RCM also enables the remote upload and download of calibration files, test data, and diagnostic information, improving efficiency for distributed engineering teams.
Available customization options include memory capacity, storage configuration, communication interfaces, and GPS tracking capabilities.
Power Requirements
For optimal performance, the RCM is recommended to operate at 19 VDC. Each unit is supplied with a Novellus DC Voltage Booster, which converts a standard 12 VDC input to 19 VDC to power the module.
Note: RCM units can be ordered without the DC Voltage Booster upon request. Please contact Novellus Engineering for configuration options.
DC Voltage Booster
Price:
$856.00 Excludes tax and shipping Read moreThe DC Voltage Booster is engineered to elevate a lower DC input voltage to a higher, stable output level. The standard configuration accepts input power through banana jacks and delivers output through a male barrel connector. Output voltage can be customized to meet specific application requirements.
This unit is commonly used to convert a 12 VDC input to 19 VDC, providing the recommended operating voltage for the Novellus Remote Calibration Module (RCM).
SENT Signal Modifier
Price:
$3,345.00 Excludes tax and shipping Buy productThe SENT Signal Modifier installs inline on any SENT network and adjusts incoming SENT data based on user‑defined configuration parameters. The device applies offsets or scaling to the signal using a Y = MX + B slope‑and‑offset formula, enabling precise manipulation of the output waveform.
In addition to linear scaling, the module supports data‑bit modification and tick‑timing adjustment, providing a flexible platform for calibration development, system verification, and advanced signal simulation.
VADR – Vehicle Autonomous Data Recorder
Price:
$9,363.00 Excludes tax and shipping Read moreThe VADR (Vehicle Autonomous Data Recorder) is an autonomous data acquisition platform designed for automated testing, remote monitoring, and calibration development. The system provides secure remote access to a wide range of calibration and development tools, enabling efficient data collection and management across distributed test environments.
Equipped with an integrated real-time clock (RTC), the VADR can automatically power up itself and connected calibration equipment at user-defined intervals to execute scheduled data-recording events. The RTC function is supported by internal batteries, eliminating vehicle battery drain during system off cycles.
The VADR also supports automated data transfer, allowing recorded files to be uploaded directly to designated network servers. Following data upload, the system can either shut down connected calibration equipment and power down automatically or continue recording for a user-specified duration.
Available customization options include automation features, memory capacity, storage configuration, communication interfaces, and GPS tracking capabilities, making the VADR a flexible solution for vehicle, powertrain, and durability testing programs.
Key Off Logger (KOL) with Bluetooth and CAN
Price:
$2,575.00 Excludes tax and shipping Buy productThe Key Off Logger (KOL) is a self-powered current logging device designed to monitor and record electrical current consumption over extended periods. The system is capable of measuring current levels ranging from milliamps (mA) to more than 500 amps (A) and can record data continuously for up to 24 hours.
Logged data is stored locally on a microSD card for convenient retrieval and analysis. The KOL features adjustable sampling rates to accommodate various testing requirements and incorporates an integrated real-time clock (RTC) to provide accurate timestamping of all recorded data.
With Bluetooth® and CAN connectivity, the KOL is well suited for vehicle electrical system analysis, key-off current draw testing, battery drain investigations, and long-duration data acquisition applications.
IPM v2 Power Cable with Banana Jacks
Price:
$161.00 Excludes tax and shipping Read more6-foot power cable equipped with banana jack connectors for use with the IPM v2 Production Tester. This cable is intended for applications utilizing a breakout box or an isolated DC power supply.
Note: The IPM v2 Production Tester is supplied with a separate power cable designed for direct connection to a standard AC wall outlet.
Kvaser D-sub 9 pin 120 Ohm termination adapter
Price:
$23.00 Excludes tax and shipping Buy productKvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor.















