Shop Novellus

white line
Custom & Build-to-Order Products

Showing all 8 results

Canalog

CANALOG

SKU:Part# N20-004 Built to Order
Price:
$4,500.00 Excludes tax and shipping
Read more

CANALOG Interface Module The CANALOG module connects to any CAN or CAN FD network and converts selected CAN channels into analog or PWM outputs based on the configured input parameters. Both output types support linear scaling using a Y = MX + B slope‑and‑offset formula, allowing precise calibration of the resulting analog or PWM signals. 

CANary BoB

SKU:Part# N20-001 Built to Order
Price:
$803.00 Excludes tax and shipping
Read more
CANary FD BoB

CANary FD BoB

SKU:Part# N20-006 Built to Order
Price:
$1,070.00 Excludes tax and shipping
Read more

The CANary FD Breakout Box provides an interface to the ATI CANary system, routing all four CAN channels and power to ATI analog hardware through standard LEMO instrumentation connectors. Each of the four CAN channels is also accessible via dedicated DB9 connectors, enabling straightforward integration, monitoring, or expansion within CAN and CAN FD networks

CAN SINGLE MODIFIER

CAN Signal Modifier

SKU:Part# N20-008 Built to Order
Price:
$3,350.00 Excludes tax and shipping
Order Here

CAN Signal Modifier The CAN Signal Modifier intercepts CAN and CAN FD messages, applies a configurable offset and scalar, and retransmits the modified data to the original receiving module. All parameters are adjustable through the included USB‑compatible configuration software, enabling precise control of message manipulation.

Primary applications include calibration development, system verification, and fault simulation for OBDII monitor evaluation in alignment with current EPA regulatory requirements.

Ethanol Analyzer

SKU:Part# N20-002 Built to Order
Price:
$3,343.75 Excludes tax and shipping
Order Here

The Ethanol Analyzer is designed for inline installation and measures both ethanol concentration and fuel temperature in real time. Measurement data is transmitted over high‑speed CAN and CAN FD networks, enabling seamless integration with calibration, monitoring, and powertrain development systems.

TCAN

SKU:Part# N20-005 Built to Order
Price:
$3,612.00 Excludes tax and shipping
Order Here

The TCAN module converts measurements from up to four thermocouple (TC) inputs into CAN messages for transmission over a CAN network. In addition to thermocouple data acquisition, the module can modify incoming CAN signals by applying configurable offsets and scaling factors before transmitting the updated data to the CAN output.

This functionality supports accurate sensor integration, signal conditioning, and calibration development within CAN-based systems.

Tri-CAN v1

TriCAN v1

SKU:Part# N20-003 Built to Order
Price:
$2,408.00 Excludes tax and shipping
Read more

The TriCAN is a versatile CAN network monitoring device designed to support both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD communications. The device enables reliable network monitoring, analysis, and integration across a wide range of automotive and industrial CAN applications.

For added flexibility, the TriCAN features integrated CAN bus termination, which can be enabled or disabled as required to accommodate specific network configurations and testing environments.

TriCAN v2

SKU:Part# N20-007 Built to Order
Price:
$3,010.00 Excludes tax and shipping
Read more

The TriCAN V2 Display is a handheld CAN monitoring device designed to collect and display vehicle network data directly from the OBDII port. Captured data can be viewed on the integrated TriCAN V2 Display or streamed wirelessly to a compatible user device via Bluetooth® connectivity.

The device supports both CAN 2.0B (medium- and high-speed CAN networks) and CAN FD protocols, providing compatibility with a wide range of vehicle and development platforms. An integrated CAN bus termination feature can be enabled or disabled as needed to meet specific network requirements and testing configurations.

Showing all 8 results

Kvaser Memorator Pro 5xHS CB

SKU:73-30130-00832-8
Price:
$2,810.00 Excludes tax and shipping
Read more

Kvaser Memorator Pro 5xHS CB is a five channel, high performance, CAN (controller area network) bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. It is supplied ‘bare board’ i.e. without a housing, and can thus be built into any system. The Memorator Pro 5xHS CB supports CAN FD.

Configurable using Kvaser’s Memorator Config Tool, Memorator Pro 5xHS CB is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied. The device is also supported in CANlib, Kvaser’s universal software development kit.

Kvaser Leaf Pro HS v2

SKU:73-30130-00843-4
Price:
$871.00 Excludes tax and shipping
Read more

Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin DSUB, bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.

Kvaser Leaf Pro HS v2 OBDII

SKU:73-30130-00849-6
Price:
$871.00 Excludes tax and shipping
Read more

Kvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin DSUB is also available. Please see Kvaser Leaf Pro HS v2 for details.

Kvaser PCIEcan 2xHS v2

SKU:73-30130-00861-8
Price:
$603.00 Excludes tax and shipping
Read more

Kvaser PCIEcan 2xHS v2 is a highly integrated, high speed controller area network (CAN) network card that adds two high speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.

Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Kvaser PCIEcan HS v2

SKU:73-30130-00866-3
Price:
$477.00 Excludes tax and shipping
Read more

Kvaser PCIEcan HS v2 is a highly integrated, high speed controller area network (CAN) card that adds a single high speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan HS.

Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Kvaser Memorator Pro 2xHS v2 CB

SKU:73-30130-00869-4
Price:
$1,502.00 Excludes tax and shipping
Read more

Kvaser Memorator Pro 2xHS v2 CB is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation.

Configurable using Kvaser’s Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 CB is CAN FD compliant.

Kvaser USBcan Pro 2xHS v2 CB

SKU:73-30130-00877-9
Price:
$1,070.00 Excludes tax and shipping
Read more

The USBcan Pro 2xHS v2 CB is a bare circuit board version of Kvaser’s USBcan Pro 2xHS v2 dual channel CAN or CAN FD interface with scripting capability. The USBcan Pro 2xHS v2 CB is supplied ‘bare board’ i.e. without a housing, and can thus be built into any system. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.

Kvaser Leaf Light HS v2 M12

SKU:73-30130-00881-6
Price:
$463.00 Excludes tax and shipping
Read more

Kvaser Leaf Light HS v2 M12 is an End of Life product. Please contact support for replacement product or more information.

Kvaser Leaf Light HS v2 J1939-13 Type II

SKU:73-30130-00915-8
Price:
$463.00 Excludes tax and shipping
Read more

Kvaser Leaf Light HS v2 915-8 Type II is an End of Life product. Please contact support for replacement product or more information.

Kvaser USBcan R v2

SKU:73-30130-00920-2
Price:
$1,058.00 Excludes tax and shipping
Read more

Kvaser USBcan R v2 2xHS is a lightweight, yet highly durable, two channel CAN bus interface. The IP65-rated housing is made of aluminum alloy, sealed with a heavy-duty polyurethane coating that assures reliable protection against water and dust ingress, and is vibration, shock and drop proof. With a standard USB2.0 connection and two high-speed CAN channels in two separate 9-pin D-SUB CAN connectors, the Kvaser USBcan R v2 2xHS handles transmission and reception of standard and extended CAN messages, with a time stamp precision of 100 microseconds. Features include error frame detection.