Shop Novellus
Custom & Build-to-Order Products
Showing all 8 results
CANALOG
Price:
$4,494.00 Excludes tax and shipping Read moreThis tool connects to any CAN or CAN FD network. The tool will use the input configuration and convert the selected CAN channels into analog or PWM outputs. Both the analog and PWM channels can be scaled using a Y=MX+B slope and offset formula.
CANary FD BoB
Price:
$1,070.00 Excludes tax and shipping Read moreThe CANary FD Breakout Box is an interface to the ATI Canary and bring out the 4 CAN channels and power to the ATI analog hardware through the standard LEMO instrumentation connectors. Access to the 4 CAN channels is available via the 4 DB9s.
CAN Signal Modifier
Price:
$3,343.75 Excludes tax and shipping Order HereThe CAN Signal Modifier intercepts CAN/CAN-FD messages, modifies them by applying an offset and scalar, and sends them to the original receiver. This modifier is configurable through the USB compatible software. Primary uses include calibration development, verification and simulating faults for OBDII monitors within the new EPA regulations.
Ethanol Analyzer
Price:
$3,343.75 Excludes tax and shipping Order HereThe Ethanol Analyzer can be placed inline and will read the percent ethanol and temperature of the fuel. The values will be output over high speed CAN and CAN FD networks.
TCAN
Price:
$3,611.25 Excludes tax and shipping Order HereThis tool converts data from 4 thermocouples (TC) into CAN messages. It is also able to add offsets and scalers to CAN signals from the CAN input to the CAN output.
TriCAN v1
Price:
$2,407.50 Excludes tax and shipping Read moreThis module is a CAN monitoring device. The TriCAN tool is a CAN network device that can operate on CAN 2.0B (medium and high speed CAN networks) as well as CAN FD. It has built-in CAN termination that can be turned on or off as required by the network.
TriCAN v2
Price:
$3,009.38 Excludes tax and shipping Read moreThis handheld device collects and display CAN data from the vehicle’s OBDII port. The resulting data is displayed on TriCAN V2 Display and/or the user’s device via Bluetooth connection. This CAN network tool is compatible with CAN 2.0B (medium & high speed CAN networks) as well as CAN FD. It has built in CAN termination that can be turned on or off as required by the network.
Showing all 8 results
Kvaser PC104+ HS/HS IDC
Price:
$600.00 Excludes tax and shipping Buy productKvaser PC104+ HS/HS IDC is a two channel, PC/104+ compatible CAN (controller area network) interface with IDC Header CAN connectors. It includes a high-performance, on-board microcontroller for CPU offloading, ensuring fast response times.
Kvaser PCIcanx II HS/HS
Price:
$791.00 Excludes tax and shipping Buy productThe Kvaser PCIcanx II HS/HS is a dual channel, high speed CAN (controller area network) interface board for the PCI-X and PCI bus. It features an on-board microcontroller for offloading your main CPU and galvanic isolation for protection against voltage spikes.
Kvaser PCIcanx II HS
Price:
$609.00 Excludes tax and shipping Buy productThe Kvaser PCIcanx II HS is a single channel, high speed CAN (controller area network) interface board for the PCI-X and PCI bus. It features an on-board microcontroller for offloading your main CPU and galvanic isolation for protection against voltage spikes.
Kvaser PC104+ HS/HS
Price:
$694.00 Excludes tax and shipping Buy productKvaser PC104+ HS/HS is a two channel, PC/104+ compatible CAN (controller area network) interface with DSUB CAN connectors. It includes a high-performance, on-board microcontroller for CPU offloading, ensuring fast response times.
Kvaser PCI104 HS/HS IDC
Price:
$694.00 Excludes tax and shipping Read moreKvaser PC104 HS/HS IDC is a two channel, PC/104 compatible CAN (controller area network) interface with IDC Header CAN connectors. It includes a high-performance, on-board microcontroller for CPU offloading, ensuring fast response times.
Kvaser BlackBird v2
Price:
$950.00 Excludes tax and shipping Buy productKvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser’s original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range.
The BlackBird v2’s ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion.
Kvaser PCIEcan 4xHS
Price:
$757.00 Excludes tax and shipping Buy productKvaser PCIEcan 4xHS is a highly integrated, high speed CAN network card that adds four high speed controller area network (CAN) channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small form factor add-on board fits many embedded data acquisition systems and supports CAN FD.
Kvaser Mini PCI Express HS
Price:
$450.00 Excludes tax and shipping Read moreThe Kvaser Mini PCI Express HS is a highly-integrated CAN (controller area network) add-on board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability.
The add on board offers a single channel, high speed CAN interface with error frame detection and on-board buffer. This board has a low profile connector that complies with the mini PCI Express standard, which connects via a cable to a DSUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected because all the electronics remain inside the computer housing.
Kvaser Ethercan Light HS
Price:
$751.00 Excludes tax and shipping Read moreThe Kvaser Ethercan Light HS is a CAN to Ethernet interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be remotely accessed from anywhere in the world.
Ethercan makes it easy to implement the Internet of Things (IoT) concept by enabling data from any CAN product or system to be sent over a corporate network or the Cloud, using the standard Kvaser API. The Kvaser Ethercan device can be configured with a static IP and comes with an Ethercan Factory Reset Device to reset the configuration to factory default DHCP settings at the push of a button.